Frequently Asked Questions about personalised plates

Do you need a private or rather what is commonly known as Personalised Number Plates? These number plates are no longer a preserve of the rich as it was previously. Having such plates is definitely nice and a way of standing out from the crowd. It serves as a sense and a way of identifying your way of life. There are different kinds of such plates available in the market today both for personal vehicle and commercial ones. This means that there is need to understand about the reputation, the cost and the limitation of such plates. There have been thousands of questions raised about the legitimacy of personalized plates but above all they are actually being used and embraced a huge population of car owners. The following are some of the frequently asked questions regarding the use of private number plates:

Continue reading “Frequently Asked Questions about personalised plates”

Uneven tyre wear

Keeping an eye on the way your tyres are wearing can alert you to hidden problems, so make regular checks on all sides of the tyre. Minor uneven wear can be avoided through tyre rotation, so do this every 6,000m miles/ 6 months. Over or under inflation will cause uneven wear on either the centre of the tread or both shoulders, respectively, so keep your tyres inflated to the manufacturers specification.(note: the pressure printed on the tyre side wall is the maximum pressure at a specified load, not the recommended pressure) A tyre pressure gauge is a cheap investment that could save you having to change tyres prematurely.

Wear that appears on one shoulder of the tyre is probably a sign of either poor wheel alignment possibly damaged suspension. In extreme cases, one side of the tread can be above the legal limit while the other side is worn down to the metal belts within the tyre. Unbalanced wheels can lead to scalloping along the edge of the tyre.

Protecting your Diesel Particulate Filter

Most people who buy a diesel powered car have an eye on fuel economy and the low road tax bracket available to low emission vehicles. If keeping your motoring costs to a minimum is your main aim then your driving style probably reflects that; smooth driving, easy on the throttle and driving at conservative speeds. While all that is great for your fuel economy, it could spell trouble for your diesel particulate filter, or DPF.

The DPF is present to reduce sooty particle emissions to the required legal level and, as it says on the tin, it filters them out of the exhaust gases from the engine. Over time, the sooty particulates build up and must be periodically burnt off by high exhaust temperatures in a process called regeneration. Low speed driving and the kind of stop/ start driving found on many a drivers daily commute will not generate the required heat to burn off the particulates.

Most modern diesel motors feature active regeneration where the cars ECU initiates an engine program to increase the exhaust temperatures but even this can prove ineffective when only short, stop/ start trips occur. In this case the DPF may start to become clogged and the DPF warning light will turn on. The manufacturers hand book should have a procedure for you to follow to eliminate the particulates and clear the filter should the warning light show. Don’t ignore the warning light as your filter could become so clogged that it requires replacement. It’s a good idea to run your diesel car at higher revs occasionally, particularly if you do no motorway driving, as this will help keep your DPF clear and avoid a breakdown.

Benefits of a clean vehicle

While some people take pride in a spotless car, others see washing their vehicle as a thankless waste of time. But there are many benefits to a regular cleaning regime. The wax coat on your car protects the cars paint. If it’s not protected and replenished you could find your car in need of a costly re-spray. Things like bird droppings, bugs and tree sap should be removed quickly as these are acidic and can quickly strip the wax coat and attack the cars finish. Salt from road spray in winter exacerbates rusting so needs washing off as often as possible.
If you allow a heavy build up of dirt on your vehicle you’ll need to take extra care when washing as small particles and stones can scratch the paint during cleaning. Rinse the car with a pressure washer first, then wash with a soft cloth. Use two buckets- one for clean water to wash the car and one to rinse off the dirty cloth. When you rinse off the soap residue, take a moment to see if the water is “beading” off the car paint. If it’s not, you need a re-wax.

Having a spare key for your car

If you buy a new car you will almost always be given two keys. If you are not, then it is worth asking the dealership how much an additional one will be and even seeing if they will waiver the cost to seal the deal as it were.

If you have an older vehicle or have purchased it second hand, you may not be so lucky and have just the one key that you reply on. This can be risky in not only can you lose it which can be extremely costly to call someone out and make a new key (not to mention time consuming) but also it may become damaged or faulty rendering it useless.

Many key cutters are offering car key cutting and programming services and are often a lot more competitively priced than going to a main dealer. Some car keys however can not be duplicated by these third party companies so always ensure you check first if they can create one for your make and model without just going off an advertised price on a board.

Have you got your locking wheel nut key?

You’re possibly asking ‘my what?’ but it is worth checking. In short, it’s a little tool which allows your wheel nuts to be unlocked for removal of the wheel, which you’ll need to do to change tyres.

Why is it important? Well – without the key, you won’t be able to replace the tyres. You can buy replacements from manufacturers, but they’re usually not held in stock so will need to be ordered. If you can’t get hold of one, the nuts can be drilled out but this will set you back about £80 on top of the tyre costs themselves.

The key itself is quite a small item and can easily be lost if not replaced promptly when used – so it’s always worth checking when you get your car back from the garage. It is not at all uncommon for them to remain on the workshop floor, and for this to go unnoticed for some months or even years – until you need a new tyre, and it’s too late.

Test driving a car

Sometimes when people go to look at a car at a dealership, they are too nervous to take it out for a test drive. I would always encourage everyone to drive the car prior to buying it as every make and model is different and you need to know that it suits your driving style. You are normally covered by the garages insurance on a test drive and you may want to double check this and see if there are any excesses to pay should you have to make a claim. Very often I have looked round a car, read all about it and decided that it was the one for me to drive it and actually be really disappointed. If this happens on a test drive it is fine as you can change your mind, but once you have signed a contract it may be a lot harder to change if at all possible. Do not be afraid to ask to drive a few different models so you can compare.

If you are adamant that you do not want to drive one, then either ask a friend or partner or the sales person to take you out in it so you can get a feel for how it handles and the smoothness of the drive.

Roof boxes for your car or van

Roof boxes have become quite popular over recent years, with many of us ditching the bungee ropes and opting for something a little more substantial.

The down side with them is that they can be quite expensive, even second hand. If you do see one at a bargain price and you are happy it is in good working order, then snap it up as they go like hot cakes.

Always check the size of a roof box, ideally by viewing one in store or in situ if advised on Gumtree or Ebay. It can be very easy to under or over estimate the size of a roof box leaving you disappointed when you go to collect it. They are extremely useful and which the larger ones you can store a lot, saving you valuable space in the boot or passenger foot wells.

Make sure you get a roof box that locks, and if buying second hand, always check that the lock works prior to completing the sale.

Should you buy an automatic transmission car?

Cars with automatic transmission are becoming quite popular. Whereas before they were often seen as vehicles for the older generation, many young drivers are favouring the benefits of an auto. One myth is that they use more fuel than a manual car. This is not entirely true as it really depends on how you drive it and you may find that it is actually more economical as it will change gear for you at the correct time.

One of the major benefits of driving an auto is when you are stuck in traffic; the constant stop start of driving on a motorway that has almost come to a standstill can be awful for drivers of all ages and experience. In an auto, you need not worry about the clutch; just move the accelerator up and down.

When starting on a hill again an auto comes in to its own, not having to fine the balance point between the clutch and accelerator has saved many drivers from the embarrassment of rolling back and the auto is almost impossible to stall!

Checking Wheel Bolts

The wheel bolts or Lugs, keep your wheels attached to your car and suitable for driving. Without these being tight you could have a catastrophic accident so you should take extra care to make sure they are secure.

When placing them on when you are tightening them you should first make sure they sit nicely. Tighten them to a point of good resistance by leaning your body weight into the turn until the nut stops moving. If you put too much force into the bolts you can damage or even strip them down which is not very practical at all.

Removing your lug nuts is a process where you need to loosen or “break” the lug before you jack them up. It is a lot easier and more controlled to remove the wheel after that as you can use a systematic approach of loosening the bottom ones first and working your way up. This way you don’t have to lose any of the lugs and so the wheel can remain stable enough until such time as you want to remove them.