You may think the codes on your tyres are only of interest to the person changing your tyres but you’d be wrong. There are a few bits of information that you should be aware of, particularly if you’re buying a second hand car or rotating your tyres yourself.
The main code on the sidewall (e.g. 165/65 R14 79T) indicates the dimensions of the tyre, its construction type and its capabilities. It’s the construction that is most relevant for the driver as different constructions must not be mixed on the same axle and you should never have radials on the front and cross ply on the rear. Both of these set ups will adversely affect the cars handling and are illegal under UK law.
The other code to note is the DOT code which confirms that the tyre complies to regulations as well as indicating where the tyre was manufactured and, crucially, when. The last four digits correspond to the week and year of manufacture and this is important because the rubber compound from which the tyre is made will begin to degrade over time and will eventually become dangerous. Tyres have a 10year life when used but only 6 years for tyres that haven’t been driven.